|
Mould
Release Coating
Mould release coating technology has evolved. It has many
advantages that surpass mould release agents. Mould fouling and
cross-contamination are now things of the past.
Nanomouldrelease
Nanomouldrelease is
the product of breakthroughs in nanotechnology. It is a super thin
coating only 0.1 to 0.2 microns thick. It firmly adheres itself to
substrate surfaces and repels water and oil. It is totally inert and
resists corrosion.
Resilience
Its operational temperature of between -50º and 450º C is
ideal for almost all types of plastic parts fabrication. With a very slow
transmigration rate of about 5 ppm per cycle,
this colourless coating does not affect post
production printing or bonding.
No Tg
Point
This mold release coating has another special feature. Its
amorphous, net-like structure does not have a Tg
(Glass Transition Temperature) point. At temperatures well above 500º C,
it turns into a microscopic non-toxic ash.
No Need for Mould Release Agents
Because of its low surface energy and dry lubricity, Nanomouldrelease replaces
the need to use mould release agents. This is excellent for micro moulders.
Decreased Failure Rates
Failure rates are usually reduced to negligible
levels and cosmetic value of parts is noticeably enhanced.
Decreased cycle time
In most cases, cycle time is reduced by between 30% to
40%. Maintenance and cleaning stoppages are also markedly reduced.
Productivity is optimised.
Reap the benefits of today's technology with the best mold release
coating available.
|
